Advanced technocracy inc. Is manufacturer, exporter & supplier of Rapid Moisture Meter

For quick determination of moisture contents of material s in powder form I.e. soil, sand. coal, pottery, gannister, cement etc. A weighed quantity of the substance under test Is placed in the body of the tester together with a measured quantity of absorbent and the tester is then sealed and shaken vigorously thereby bringing the sample and the absorbent into intimate contact. The pressure of gas liberated by interaction of moisture in the sample and absorbent actuates the gauge which is directly graduated in percentage moisture on the wet weight basis. the weight. A conversion chart Is provided for converting percentage moisture content on the weight basis to percentage on the dry weight basis. The Unit consists of pressure vessel with clamp for sealing cap rubber sealing gasket, gauge calibrated in percentage moisture content to 25% on the wet weight basis, counter poised balance for weighing sample, scoop for measuring carbide reagent, bottle of reagent, cleaning brush. Complete in wooden carrying case with handle. The Unit can be used to determine percentage moisture contents on the wet weight bases upto 25% which Is equal to 33.3% moisture contents on the dry weight basis. B) Rapid Moisture Meter same as No. 305 but dial gauge is calibrated In percentage moisture content to 50% on the wet weight basis which is equal to 100% moisture content on the dry weight basis 

With Proving ring & dial Gauge

ASTM D 1883,

Item Code: In recent years it has become important to know C.B.R. Values in -situ. It is useful in determining the load carrying capacity in the field when in -place density and water contents are such that the degree of saturation is 80% or greater, when material is cohesion less and coarse grained, such that it is not affected by changes in water contents and when the material has been in place for considerable time. The loading is affected by means of a mechanical load frame which can be fixed to the underside of a truck. Specifications : Mechanical screw loading jack, 10000 kg capacity with U -bracket and swivel head. Penetration piston, 50mm dia. Threaded at the upper end. Extension rods set consisting of 2 lengths 5cm. 2 lengths 10cm., 1 length 30cn1., 1 length 50cm, and 1 length 100cm., used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing.

We are an eminent name, which is engaged in delivering Laboratory Sieves to our clients. The offered range of laboratory sieves is available in varied customized designs, shapes, colors and allied specifications as per the diverse requirements of esteemed clients. Along with this, the offered range of laboratory sieves is suitably checked on different characteristics to maintain its authenticity throughout the manufacturing process.

Item Code: In recent years it has become important to know C.B.R. Values in -situ. It is useful in determining the load carrying capacity in the field when in -place density and water contents are such that the degree of saturation is 80% or greater, when material is cohesion less and coarse grained, such that it is not affected by changes in water contents and when the material has been in place for considerable time. The loading is affected by means of a mechanical load frame which can be fixed to the underside of a truck. Specifications : Mechanical screw loading jack, 10000 kg capacity with U -bracket and swivel head. Penetration piston, 50mm dia. Threaded at the upper end. Extension rods set consisting of 2 lengths 5cm. 2 lengths 10cm., 1 length 30cn1., 1 length 50cm, and 1 length 100cm., used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing.

Carries upto 7 sieves of 150mm or 200mm diameter. The shaker is driven by a ¼ H.P. Motor through a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction on inclination charges progressively in clockwise direction. If the stop pin below the table is removed, the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder are supplied. The holder can be fixed on the top of the upper most sieve, and thus the sieve set in firmly held. Suitable for operation form 230 V, 50 Hz Single Phase AC Supply.

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia.

Specification :

Note: Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost. 

Shrinkage limit is the maximum water content at which a reduction in water content does not cause an appreciable reduction in volume of the Soil Mass. At shrinkage limit, on further reduction in water, air enters in to the voids of soils and thus keeps the volume constant. The apparatus can be used to determine shrinkage limit and to calculate other shrinkage ratio, shrinkage index and volumetric shrinkage.

Casagrande method in mechanical form is known as liquid limit method and has been in use for soil mechanics for a number of years. The liquid limit data of soils is useful to correlate mechanical properties of soil, such as compressibility and lower shear strength. Liquid limit is the water content at which soil passes from zero strength to an infinitesimal strength, hence the true value of liquid limit cannot be determined. For determination purpose liquid limit is that water content at which a part of soil, cut by a groove of standard dimensions, will flow together for a distance of 1. 25 cm under an impact of 25 blows in a standard liquid limit apparatus. The soil at the water content has some strength which is about 0. 17 n/cm. Sq. (17gms/sq. Cm. ) at this water content soil just passes from liquid state to plastic state. 

Specifications: it consists of a brass cup held on an adjustable bracket. The cup can be adjusted for a fall of 1cm and can be raised and dropped on a rubber base of standard hardness by cam action. Complete with one casagrande grooving tool, one astm grooving tool and a height gauge block (type a of is 9259)

We offer a wide range of very high quality Cone Penetrometer at a very affordable market price. These products are manufactured using very high quality raw materials that are sourced from very reliable vendors. These products undergo various sets of quality testing at each level of its production to ensure superior quality and flawless performances. We believe in effective and timely delivery of product once ordered by our clients.

High speed stirrers are widely used in laboratories for blending laboratory test chemicals and materials. Though it is a high speed stirrer, it is fitted with a mechanism to withstand variable speeds like low, medium and high speeding parameters. The high speed stirrer is made up of a stand that is attached with electric motor to supply power to the device. Dispersion vessel rests on the stand of the stirrer. 

We manufacture high speed stirrers that are made with mechanism designed to give high performance and match the industrial quality standards. Along with laboratory use, high speed stirrers are also used in other industries like the food, dairy, print, pharmaceuticals, cosmetics and ink.

Consolidation of clay deposits leads to distress in buildings such as cracks and failures. Consolidation is the reduction of volume of soil due to expulsion of water from its pore space caused by sustained loading. This phenomenon is time dependent. The one-dimensional consolidation test performed on an undisturbed sample of clay is useful for understanding the history of the soil deposit. The test results can be used for calculating the settlement of structures built on clayey soil.

The standard outfit comprises fixed ring type of consolidometer cell for testing specimens 60 mm dia x 20 mm thick, but the unit is so designed that specimens of varying sizes from 50 mm dia to 100 mm dia can also be tested. Besides, the same loading unit can be used with floating ring consolidometer cells, which can be supplied at extra cost. The standard outfit is supplied with a set of weights to give a total pressure of 10 kg/cm2 (besides a seating load of 0.05 kg/cm3 on the specimen), but an additional set of weights are required to reach the full capacity of 20 kg/cm2. The necessary accessories to perform the permeability test of the 'Varying Head' type can also be provided at extra cost. The outfit is also available as three-gang or six-gang in which three/six consolidometers are mounted on a single frame. The consolidation may be measured by the conventional dial gauges or using the transducers and electronic readout unit in Digital Models.

Hand Operated IS : 2720 (Part XIII)

The unit confirms to IS2720. It has a hand operated horizontal loading system for shearing the specimen. Hangers are provided for creating normal stress.

Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It can be mounted vertically or horizontally as desired. It has an unique feature that three 38mm dia sample.

SPECIFICATION: